What are the operative steps to set up an HP Tango Printer without any interruptions?
Here is an easy guide about How to setup a Hp tango printer without any interruption. The latest addition to an already excellent range of reliable printing machine, Hp tango utilize the cloud technology and employ two-way connection. With Hp tango, you can print scan, and copy your documents, photos, and emails from any device, anywhere with relative ease.
Simple Steps to setup Hp tango printer
In just four simple steps, you will have your tango printer set up and ready. Read and apply them in the same order as given here:
Step 1: Remove Hp tango printer’s packaging
- Bring out the printer from the box.
- Apart from the printer, you also get a USB cable, power chord, and ink cartridges.
- Go through the list and see that all the printer’s components are available.
- Remove any adhesive tape binding the packaging material.
- Now remove all the packing. Look inside the Cartridges cabinet too.
- Look in the box there will be an output wrap.
- Place it on a flat surface and put the printer on it, in alignment with the indentation.
Step 2: Ensure Power Supply to the printer
Your Hp tango printer is out of the box and is free from the packaging. It needs a power source to operate. So let’s connect it to a power supply.
- At the rear end of the printer, you will find a power supply port.
- Insert one end of the power chord in it and plug the other end into the power outlet.
- To turn your printer On, press the power button.
Step 3: Insert Ink cartridges & Load paper
- Move the paper width guide all the way to the edges of the input paper input tray.
- Slide some A4 size paper in the tray, and move the paper width guide to the required width.
- Now press the ink door button on the printer to open the ink cartridge access door.
- Remove an ink cartridge from its packing. Hold it only at the black plastic surface.
- Carefully remove the cover from the contact point. Now keeping the nozzle towards the printer, insert it in the slot and apply a gentle push till you heard a snap sound.
- Do the same with other cartridge and when both are correctly placed in their slot close the access door.
- Your printer will print an alignment page. Don’t interfere with the process, wait till the paper is fully ejected.
Step 4: Connect the printer to the computer via network
Your printer is now ready to print. The only thing remain is configuring how it will receive the print command from your computer. The best way is to connect it to a network.
- The easiest way to connect your tango printer to a wireless network is through Hp smart app.
- Download Hp smart app from the Hp website and run it.
- Follow the on-screen prompt to complete the connection.
- The app will configure the printer over the wireless network and let you easily manage printer settings.
Recommendation By now it would be evident to You that setting up the tango printer is a no-brainer. But if you are still not confident about the Procedure or You have hit a bump during the process, get in touch with Hp support and get assistance from Hp certified support executive.
If you experience any issue while installing HP printer and printing, please contact at the toll-free number at +1 (214) 308-0263 or visit 123.hp.com/setup for guidance